SMT-W6100 User Guide130Wi-Fi Security Settings (Menu 6.5.2)SMT-W6100 can automatically detect the security mode of AP from probe response message andassociate with selected AP. SMT-W6100 also supports 'Security Mode' to set security mode of STAmanually by setting following parameters.• Security mode: Manual SetChange WiFi security Mode(WPA, 802.11i(WPA2)) On/Off.If Security Mode is set to OFF, all below parameters are not allowed to access.• WPA type: You can select one of Security types, WPA, 802.11i(WPA2)• Pairwise key encryption: You can select the encryption method of unicast data, TKIP or AES-CCMPIf user selected security type as WPA, TKIP is only• Group key encryption: You can select the encryption method of unicast data, TKIP or AES-CCMP.If user selected security type as WPA, TKIP is only• Authentication: You can select the authentication method of STA, OPEN or OPEN with EAP.• EAP type: You can select the EAP authentication method of STA, TLS, TTLS or PEAP• EAP sub-type: When eap type TTLS or PEAP is selected, user can select a EAP tunneledauthentication method of STA such as PAP, CHAP, MSCHAP and MSCHAPv2• Private key PW(TLS): If TLS is selected as the EAP authentication method, user shall insert thepassword of user private key which is used to generate user certificate.• EAP ID: If one of the EAP type is selected, user shall insert a eap id registerd in authenticationserver.• EAP Password: If one of the EAP type is selected, user shall insert the password of eap id registerdin authentication server.
