0345 855 0700Functions Available in Idle ModeFunction DescriptionCheck missed calls When in idle mode, select the [Menu] soft button > [Call log] > [Missed] to check thenumbers for the missed calls.Changing the bell sound When in idle mode, select the [Menu] soft button > [Sound] > [Ring Tone] to changethe bell sound.Viewing received messages When in idle mode, select the [Menu] soft button > [Message] > [Inbox] to view thereceived messages.Sending a message When in idle mode, select the [Menu] soft button > [Message] > [New Msg.] to send amessage.Call Forward When in idle mode, select the [Menu] Soft button > [Call FWD], and enter thedestination number.Call Pickup When in idle mode, select one of the pick-up functions from the [SVC] soft button tochange settings.Do Not Disturb (DND) When in idle mode, select the [SVC] soft button > [Do Not Disturb] > [On/Off].Functions Available During a CallFunction DescriptionVolume Control To increase or decrease the volume, you can adjust the volume using the [Vol] button.This function is available for handset, speaker mode.Call Hold Press the [Hold] button during a call. An On ex-hold message is displayed on the LCDscreen (in handset mode) or change state Idle mode (in speaker mode).Call TransferPress the [Transfer] button during a call. Once a dial tone is heard, dial the phonenumber to call. When the called party is busy or does not want to receive the call, pressthe [Transfer] button again to resume the previous call.Group ListenDuring a call, select the [SVC] soft button > [GROUP LISTEN], and press the [OK]button. Then the conversation can be heard, not only through the handset, but alsothrough the speaker. To release this function, select the [listen (Off)] from the servicemenus.MuteDuring a call, press the [Mute] button, then the your voice is muted to the other party.To release this function, press the [Mute] button again.ConferenceDuring a call, press the [Conference] button. Once a user enters the phone number ofthe counterpart, the call is placed then press the [Conference] button to be connectedto the existing call and start the conference. Add to conference member, press the[Conference] button and enter the phone number of the counterpart.