English _17● INSTALLATION & CONNECTIONRemoving an SD Memory CardGently press down on the exposed end of the memory card as shown in the diagram toeject the memory card from the slot.1 2 3 4 5 61 : ALARM IN 4 : GND2 : ALARM OUT 5 : RS-485+3 : ALARM COM 6 : RS-485-Pressing too hard on the SD memory card can cause the card to shoot out uncontrollably from theslot when released.To remove the SD memory card, set <Record> to <Off> from <SD record> and press[Apply ( )]. (page 62)If you have saved data in the SD memory card, removing the SD memory card prior to settingrecord to OFF will cause damage to the data stored in the card.If the SD memory is inserted, the SD LED indicator on the rear of the camera will turn on.If there occurs a problem in the SD memory, the SD LED indicator will blink.J
