Samsung SNO-7080R User Manual
Also see for SNB-7000: User manualTechnical specificationsUser manual
                                                                                                      | |
Contents
|
English _71● SETUP SCREENTime scheduleYou can configure so that an event will occur at a scheduled time regardless of the actualoccurrence of the event.1. From the Setup menu, select the<Event ( )> tab.2. Click <Time schedule>.To set the timer event1. Set <Timer event setup> to <Enable>.2. Specify the <Activation time>.• Always : Always activates in operatedmode at the set interval.• Only scheduled time : Periodicallyactivates in operated mode at aspecified time and date.3. Specify the <Transfer interval>.4. Specify the activation conditions.• FTP sending : Specify the use of the FTP transfer if an event occurs.• Record : Specify the use of recording if an event occurs.5. When done, click [Apply ( )].Network disconnectYou can perform the saving/relay operation after receiving an event of a physicallydisconnected network.1. From the Setup menu, select the<Event ( )> tab.2. Click <Network disconnect>.3. Specify the use of “Networkdisconnect”.4. Specify the activation time andactivation condition. For more information about <Activationtime> and <Action>, refer to “Alarm input”.(page 62)5. When done, click [Apply ( )]. |
Related manuals for Samsung SNB-7000
manualsdatabase
Your AI-powered manual search engine