Samsung SP-C802RGL Manual

Also see for SP-C802R: User manual

4140This function allows you tochange the display screen inthe base set standby stateHelp Function Help FunctionAdjusting the flash time (In the standby state): 0 . 1 sec : 0 . 2 sec : 0 . 3 sec : 0 . 4 sec : 0 . 5 sec: 0 . 6 sec : 0 . 7 sec : 0 . 8 sec : 0 . 9 sec : 1 . 0 sec● The flash time is to 0.4 second as default.You can adjust the flashtime.● Even though there was no low voltage warning in the standby state, the low voltagewarning may be generated if you make calls using the remote set as it consumes thebattery.Low Voltage Warning FunctionCharge the remoteset immediagely.When the batterycharging is insufficientblinks and warningtone is transmitted.This function generateswarning tone when thebattery voltage of theremote set drops belowthe specification.�Display Screen Selection� � � � � � � �Press the buttoncorresponding to thedesired time.Toll Restriction1 2 3 4● When the toll restriction is set, is displayed on the screen and when it iscancelled, disappears.● Even when the toll restriction is set, you can make a toll call with the base set. But,when you start dialing 8 on the remote set, the unit beeps and then returns to thestandby state.� Check � Cancel thetoll restriction� Set the tollrestrictionSetting the Dialing Mode1 2 3 4● You can set the dialing mode either as rotary dialing or tone dialing.● When the rotary dialing is set, is displayed during the call and whenthe tone dialing is set, is displayed.� Check � Rotary Dialing � Tone Dialing● When the dialing mode of the base set is set to the rotary dialing modePress button while dialing with the base set or the remote set, and the dialing mode isswitched to the tone dialing mode.PT