Preventing Screen Burn-inTo reduce the possibility of screen burn, this unit is equipped with screen burn preventiontechnology. This technology enables you to set picture movement up/down (Vertical Line) and sideto side (Horizontal Dot). The Time setting allows you to program the time between movement of thepicture in minutes.1121 Press the MENU button.Press the ▲ or ▼ button to select “Setup”, then pressthe ENTER button.2 Press the ▲ or ▼ button to select “Screen BurnProtection”, then press the ENTER button.3 Press the ENTER button to select “Pixel Shift”, then pressthe ENTER button.• Pressing the ▲ or ▼ button will alternate between“On” and “Off”.You will also see the items “Horizontal Dot”,“Vertical Line” and “Time”.• Pixel Shift: Using this function, you can minutelymove pixels on the PDP in horizontal orvertical direction to prevent after imageon the screen.4 Press the ▲ or ▼ button to select the item you wish tochange, then press the ENTER button.Press the ▲ or ▼ button to change the value of the item,then press the ENTER button.• Optimum condition for pixel shift;5 Press the MENU button to exit.Pixel Shift √All White √Signal Pattern √Screen Burn ProtectionT VMove Enter ReturnPixel Shift : OnHorizontal Dot : 2Vertical Line : 2Time : 2Pixel ShiftT VMove Enter ReturnPixel Shift : OnHorizontal Dot : 2Vertical Line : 4Time : 4Pixel ShiftT VMove Enter ReturnHorizontal DotVertical LineTime(min)222Plug & Play √Language : English √Time √V-Chip √Caption √Menu Transparency : Medium √† MoreSetupT VMove Enter ReturnOffOn01234
