Samsung SP-R7000 User Manual

Also see for SP-R7000: User manual

38 39This option allows you to enter a greeting message that will bedisplayed when your phone is in the Standby mode. You can change thegreeting message according to your own preference.1. In the Standby mode, press the ( or ) button to access the MainMenu mode.2. Press the ( or ) button repeatedly to scroll to Greeting, thenpress the button.Result : The cursor will blink. If you have already registered a greetingmessage, the message is displayed.3. Enter your personal greeting by pressing the alphanumeric keys on thenumber keypad. A maximum of 24 digits can be entered. Refer to‘Entering a Name’ on page 30.Note: If necessary, use the button to erase the current greetingmessage.4. Press the button to save the setting.Result : Your phone returns to the Standby mode and you can see yourgreeting message which you have entered on the LCD window.Note: If you want to restore the default greeting message, SAMSUNG,erase all the existing messages by pressing and holding down thebutton and then pressing the button.Greeting MessageWriting Greeting MessageIt is possible to set the phone to restrict numbers that can be dialled.The phone cannot dial a phone number beginning with the numbers thatyou have specified. You can set up to 4 different restricted numberscontaining up to 4 digits each.Once you set the call barring number, the handset requires the PIN codewhen the restricted number is dialled. If you fail to enter the correct PINcode three times successively, your phone returns to the Standby mode.If you enter the correct PIN, you can make calls.Barring1. In the Standby mode, press the ( or ) button to access the MainMenu mode.2. Press the ( or ) button repeatedly to scroll to Barring, thenpress the button.Result : You are asked to enter the PIN code. It is preset to ‘0000’.3. Enter the PIN code, and press the button.Result : The first block cell, containing a restricted number appears, ifany.4. If you want to choose another block cell, select the desired cell byusing the ( or ) button. Press the button.Result : Edit Bar Block [ x ] is displayed (where ‘x’ designates theblock cell number).5. If necessary, delete the current number by pressing the button.Enter up to a 4-digit number by using numeric keys that you want torestrict, then press the button.6. If you want to block another number, repeat steps 3 through 6.If you want to exit the Barring menu, press and hold down thebutton about 3 seconds.Setting Call Barring Numbers