Section 9: SNAP 95SNAP MenuSNAP MenuTo access the SNAP menu:1. In standby mode, momentarily press the Camera key ( ) on the right side of thedevice.Note: You can also access the SNAP menu by pressing the Menu (left) soft key ( ), then pressing for SNAP.The following options appear in the display:• Camera — Launches the camera.• Video Camera — Launches the video camera.• Int Album — Lets you access and manage the photo album on the device.• Ext Album — Lets you access and manage the photo album on a memory card.• Photo Studio — Lets you modify individual photos in a selected photo album.• Settings — Lets you set basic parameters for the camera and video camera.• Print Photos — Lets you print photos from a selected photo album using a USB or Bluetoothprinter.• Memory Info — Lets you quickly and easily review and manage your device memory usage.CameraTaking pictures with the built-in camera can be as simple as choosing a subject, using thedisplay as the viewfinder to point the lens (located on the top rear of the device), andpressing a button.Note: You can use the camera with the device slide open or closed.Taking Snap ShotsTo take a picture using the current camera settings, do the following:1. In standby mode, press and hold the Camera key ( ) on the right side of the device.The message “Starting Camera” appears in the display followed by a camera viewfinder screen.Note: You can also activate the camera by pressing the Menu (left) soft key ( ), then press (for SNAP) andfor Camera.You can switch from Camcorder mode to Camera mode by pressing the key.Tip: At this point, you can close your device and continue to use the camera. With Auto Save set to On, the photos youtake with the slide open or closed are automatically saved in the Int Album or Ext Album. (See “Settings” on page 106 formore information.)2. Using the display as a viewfinder, point the camera at your subject.? @.? @.