Tools and Calendar 190 Grasp the device firmly and locate the slot at the bottom of the device. Place your fingernail in the opening and firmly “pop” the cover off the device (similarto a soda can).2. Firmly press the card into the slot and release it. The card should pop partially out of theslot.3. Remove the card from the slot.4. Replace the battery cover.Important: You can easily damage the microSD card and its adapter by improperoperation. Please be careful when inserting, removing, or handling it.Do not over-insert the card as this can damage the contact pins.Be sure to use only recommended microSD cards (<32GB). Using non-recommended microSD cards could cause data loss and damage your device.Make sure your battery is fully charged before using the microSD card. Yourdata may become damaged or unusable if the battery runs out while using themicroSD card.Insert a microSD Card1. Remove the battery cover. Grasp the device firmly and locate the slot at the bottom of the device. Place your fingernail in the opening and firmly “pop” the cover off the device (similarto a soda can).2. Orient the card with the gold strips facing down.
