Tools and Calendar 108Bluetooth SettingsConfigure your device’s Bluetooth settings.► Press and tap > > Bluetooth.Change the Device NameThe device name identifies your device to other devices.1. Press and tap > > Bluetooth.2. If Bluetooth is not on, tap the ON/OFF slider to turn it on.3. Tap > Rename device.4. Enter a name for your device, and then tap OK.Pair with a Bluetooth DeviceSearch for a Bluetooth device and pair with it, to establish a connection between your deviceand the target device. After pairing, your device and the target device will recognize each other,and you can connect without entering a passcode or PIN.To listen to music with your headset or car kit, the headset or car kit must support the A2DPBluetooth profile.Note: Due to different specifications and features of other Bluetooth-compatible devices,display and operations may be different, and functions such as transfer or exchangemay not be possible with all Bluetooth-compatible devices.1. Press and tap > > Bluetooth.2. If Bluetooth is not on, tap the ON/OFF slider to turn it on.3. Make sure that the headset is discoverable, so that your device can find the headset.Refer to the instructions that came with the headset to find out how to set it todiscoverable mode.4. Tap Scan to scan for Bluetooth devices within range.5. When you see the name of your headset displayed in the Bluetooth devices section, tapthe device. Your device then automatically tries to pair with the headset. If automaticpairing fails, enter the passcode supplied with your headset.
