Samsung SPH-m610 User Manual

Also see for SPH-M610: User guide

Contents

Samsung SPH-m610 User Manual Manual pdf 15 page image

Getting Started 12Getting StartedIn Power Save mode, your phone searches for a signal periodically without yourintervention. You can also initiate a search for service by pressing any key (whenyour phone is turned On).Tip: The Power Save feature helps to conserve your battery power when you are inan area where there is no signal.To turn your phone off:• Press and hold for two seconds until you see the powering downanimation on the display screen.Your screen remains blank while your phone is off (unless the battery is charging).Using Your Phone’s Battery and ChargerBattery CapacityYour phone is equipped with a Lithium Ion (LiIon) battery. It allows you to rechargeyour battery before it is fully drained. The battery provides up to 3 hours ofcontinuous digital talk time.When the battery reaches 5% of its capacity, the battery icon blinks. When thereare approximately two minutes of talk time left, the phone sounds an audible alertand then powers down.Note: Long backlight settings, low signal strength, searching for service, vibratemode, playing games, or browser use affect the battery’s talk and standby times.Tip: Be sure to watch your phone’s battery level indicator and charge the batterybefore it runs out of power.Installing the BatteryTo install the LiIon battery:1. Pull down on the release button (located on the back of the phone).2. Lift up the battery cover under one of the removal slots located on eitherside of the phone.