Samsung SR-L36 series Owner's Instructions Manual

Contents

PREPARING THE FRIDGE/FREEZER51 Install all shelves and compartments removed during transport in the correct positions.2 Clean the fridge/freezer and accessories to remove any dust that accumulated during packing andshipping.3 The interior light should accumulated during come on when you open the refrigerator.Set the temperature control to the coldest temperature and let the refrigerator operate for one hour.The freezer should get slightly chilled and the motor should run smoothly with a soft hum and nonoise.Your fridge/freezer is operated by a compressor which switches “on and off” to maintain the internaltemperature. When the compressor is new, it requires running in for a period of up to five months.During this period, it may be slightly noisy. This is quite normal and does not represent a fault.4Store food once the temperature in the refrigerator is sufficiently low. It takes a few hours afterstarting the refrigerator to reach the proper temperature.If the appliance does not operate correctly, check the electricity supply. If the problem persists,contact your dealer.5To prepare your appliance for use and check that it is running correctly, take the following steps.USING THE CONTROL FEATURESPOWER1 2 3 4 5REF.TEMP.A. Basic Model1 POWER Button• Main power on/off switch.• Switches the appliance on and off.2 REF.TEMP button• Press the REF.TEMP button to control the refrigerator temperature.• Initially, the mid-point temperature setting is selected.• There are five temperature settings, represented by five indicator lights (À).When all lights are on, the temperature is at its coolest.• Press the REF.TEMP button one or more times until the required temperature is set.• The freezer temperature will be adjusted automatically according to the refrigerator temperature.1 2À