ŝ32ŞMeteringƈ If you cannot obtain suitable exposure conditions, you can change the meteringmethod to take brighter pictures.- MULTI : Exposure will be calculated based onan average of the available light in theimage area. However, the calculationwill be biased towards the centre of theimage area. This is suitable for generaluse.- SPOT : Only the rectangular area in the centreof the LCD monitor will be metered forlight. This is suitable when you want the subject in the centrecorrectly exposed, regardless of the back lighting.- CENTER : Exposure will be calculated based on an average of the availablelight in the image area. However, the calculation will be biasedtowards the centre of the image area. This is suitable for taking apicture of small object like a flower or insects.ſ If the subject is not the centre of the focus area, do not use the spot meteringas this may result in an exposure error. In this circumstance, it is better to useexposure compensation.Continuous shotƈ You can select the type of shooting and the number of continuous shots.- SINGLE : Take one picture only- CONTINUOUS : Images will be taken continuouslyuntil the shutter button is released.The shooting capacity depends onthe memory.- HIGH SPEED : This takes 3 shots continuously(2.5 shots per second) when theshutter is pressed and held down.- M. CAPTURE : This takes 7 shots per second, when the shutter is pressedand held down. After completing the continuous shooting,images are saved and the images play back on the RearLCD. The maximum number of shots is 20 and the imagesize is fixed as 1024X768.- AEB : Take three pictures in a series using different exposures : Shortexposure (-1/2EV), standard exposure(0.0EV) and over exposure(+1/2EV).Use this mode if it is hard to decide exposure of the object.ſ High resolution and picture quality increases file saving time, which increasesstand-by time.ſ If the [CONTINUOUS], [HIGH SPEED], [M. CAPTURE] or [AEB] sub menu isselected, the flash is switched off automatically.ſ It is best to use a tripod for the AEB shooting as the time to save each imagefile is longer and blurring caused by camera shake may occur.ſ When the [M.CAPTURE] menu is selected, you only can select ISO AUTO,400, 800, 1600[Still image mode]AEBM. CAPTUREHIGH SPEEDCONTINUOUSSINGLE[PROGRAM mode]CENTERSPOTMULTIDownloaded from www.Manualslib.com manuals search engine