Samsung SRD-470 User Manual

Also see for SRD-470: User manual User manual Specifications Quick guide

Contents

60_ using the DVRusing the DVRWhen a router is usedTo avoid IP address conflict with the DVR's static IP, check followings :Setting the DVR with a static IP- Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem ora router in a Local Area Network (LAN) environment.Setting the DVR NetworkSet the <Connection Mode> in <Connection> menu of the connected DVR to <Static IP>.Check whether the set IP address is in the static IP range provided by the IP router.IP, Gateway, and Subnet Mask : Consult your network manager.Check whether the set IP address is in the static IP range provided by the IP router.If a DHCP server is configured with starting address (192.168.0.100) and end address (192.168.0.200), you shouldset the IP address out of the configured DHCP range (192.168.0.2 ~ 192.168.0.99 and 192.168.0.201 ~192.168.0.254).Check the Gateway address and subnet mask are equal to those set in the IP router.Setting the DHCP IP Address of the IP routerTo access the IP router’s configurations, open a web browser on the local PC that is connected to the IProuter and enter the router’s address (ex : http://192.168.1.1).At this stage, make the local PC's windows network configurations to the below example :Ex) IP : 192.168.1.2Subnet Mask : 255.255.255.0Gateway : 192.168.1.1- Once connected to the IP router, it prompts with password. While entering nothing to the User Name field,enter “admin” into the password field and press <OK> to access the router configurations.- Access the router’s DHCP configuration menu and set its DHCP server activation, and provide the start andend address.Set the start address (192.168.0.100) and end address (192.168.0.200).Above steps may differ from the router devices depending on the manufacturer.Setting Router’s Port ForwardingSet the protocol to <TCP>.External Port Range : Enter the TCP Port set in the<Port(TCP)> in <Protocol> menu of the connected DVR.If more than one DVRs are connected to the router, theTCP port can be different.Internal PC IP Address : Enter the IP address set to the<IP> in <Connection> menu of the connected DVR.Internal Port Range : Set the same to the “External PortRange”.Above steps may differ from the router devices depending on the manufacturer.Port forwarding is required when you want to access the DVR connected to the router from outside of the router’snetwork.J ••1.2.J 3.•1.2.M •1.2.3.4.M Connection ModeProtocolConnectionx Protocol Type TCPx Port(TCP) 554 ~ 557x Port(UDP) 8000 ~ 8159x Unicast/Multicast Unicastx Multicast IP 224.126. 63. 1x TTL 5x Webviewer Port 80OK CancelZ6806127401A_SRD-470, 470D-IB_EN60 60Z6806127401A_SRD-470, 470D-IB_EN60 60 2010-04-30 오후 6:09:172010-04-30 오후 6:09:17