Samsung ST60 User Manual

Contents

33When the menu is displayed on the LCDmonitor, pressing the Left button makesthe cursor shift to the left tab.When the menu is not displayed on theLCD monitor, the Left button operates asthe Flash ( ) button. Selecting the flash mode1. Select the desired Recording mode, except for the [Movie]mode. (p.21)2. Press the Flash button until the desired flash mode indicator isdisplayed on the LCD monitor.3. A flash mode indicator will be displayed on the LCD monitor.Use the correct flash to suit the environment. Flash range (Unit: m)ISONormal Macro Auto macroWIDE TELE WIDE TELE WIDE TELEAUTO 0.8~3.5 0.8~2.0 0.2~0.8 0.4~0.8 0.2~3.5 0.4~2.0[Selecting the Auto flash]Flash ( ) / Left button If you press the shutter button after selecting the flash, the firstflash fires to check the shooting condition (Flash range andPower ratio of flash). Do not move the camera until the secondflash fires. Using the flash frequently will reduce the life of the battery. Under normal operating conditions the re-charging time forthe flash is usually within 4 seconds. If the battery is weak, thecharging time will be longer. The camera flash does not operate in the [Movie] and someScene modes. Take photographs within the flash range. The image quality is not guaranteed if the subject is too closeor highly reflective. When taking an image in poorly lit conditions with the flash,there may be a white speck in the captured image. The speckis caused by the flash light reflecting off atmospheric dust.