6160Alert Type Menu 3.3This option allows you to indicate how you are to beinformed of any incoming calls. The following optionsare available.Light only: only the backlight is switched on; thephone neither rings nor vibrates.Melody: the phone rings using the ringing toneselected via the Ring Tone menu option (3.2).Vibration: the phone vibrates but does not ring.Note: In idle mode, you can set the phone to vibrateonly (silent mode) or to start ringing again,simply by pressing the C key (for furtherdetails, see page 20).Vibra+Melody: the phone first vibrates three timesand then starts ringing.Keypad Tone Menu 3.4This option allows you to select the tone that thekeypad generates when you press a key. Thefollowing options are available.OFF: the keys do not make any sound.Tone: each key, when pressed, makes a differentsound.Beep: each key, when pressed, makes the samesound.Sound SettingsYou can use the Sound Settings feature to customizevarious settings, such as the:• Ringing tone or melody, volume and type• Sounds made when you press a key, make anerror or receive a messageRing Volume Menu 3.1This option allows you to adjust the ringing volumeto one of five levels.Press the „ key to increase and the key todecrease the volume. The greater the number ofbars, the greater the volume.Ring Tone Menu 3.2This option allows you to select the required ringingtone. You can choose between 20 different tones.Each time you select a tone, it is played for a fewseconds. Tones 19 and 20 correspond to the melodiesthat you can compose, using the Melody Composermenu option (3.9).SSoouunndd SSeettttiinnggss