88 2F. Voice Services3. Hold the phone so that the microphone isapproximately six inches away from your mouthand you can clearly read the onscreen numbersequences.4. Repeat either the digits or words shown onscreenusing a normal tone of voice. If the phone cannot recognize your words, it willcontinue to display the same informationonscreen.5. Repeat the previous step for the remaining sets ofdigits or words.6. When you are finished with a full session, you willreach a screen that reads, “Adapting.”7. Touch OK to save.To reset the adaptation:1. Press and touch Main ( ) > VoiceCommand.– or –Press and hold .2. From the “Say a Command” page, touch Settings> Adaptation > Reset Voice. (The phone displays areset voice dialog.)3. Touch Yes to reset the voice recognitionparameters or No to exit.Using Choice ListsIf your phone is not confident it has recognized a nameor number correctly, it might display a choice list andprompt you with “Call?” followed by the first choice onthe list. To confirm the choice, say “Yes,” or to hear thenext choice, say “No.” You can also select the correctchoice by touching the associated onscreen option. Tocancel the command, say “Cancel,” or to say the nameor number again, say “Repeat.”Note: It is recommended that you perform the completeAdapt Voice session at least once to achieve themaximum benefit of this feature. If a partial adaptation isperformed, you can always return later and resume theprocess from the halfway point.MainM350.book Page 88 Monday, October 11, 2010 9:58 AM
