Samsung Series 4+ 430 User Manual

Also see for Series 4+ 450: Quick setup guide User manual User manual Quick start guide User manual

Other InformationImage Retention (Burn In) bsue. • To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology.Pixel Shift technology enables you to set picture movement up/down (VerticalLine) and side to side(Horizontal Dot).The cable/set top box remote control • Program the Cable/Set remote control to operate the T_ Referto the Cable/Set user manual for thedoesn't turn the TV on or off, or adjust the SAMSUNG TV code.volume.A "Mode Not Supported" message •appears.Caption on TV menu is greyed out.There is a plastic smell from the T_The TV Signal Strength is unavailable inthe Self Diagnostic Test menu.The TV is tilted to the side.The channel menu is greyed out(unavailable).Your settings are lost after 30 minutes orevery time the TV is turned off.You have intermittent loss of audio orvideo.You see small particles wtlen you lookclosely at tile edge of tile frame of the T_POP 0V's internal banner ad) appears onthe screen.Check the supported resolution of the T_, and adjust the external device's output resolution accordingly.Refer to the resolution settings on page 11 of this manual.• Caption can not be selected in the TV menu when connected via HDMI or Component (p. 21).• Caption must be activated on the external device (p. 21).• This smell is normal and will dissipate over time.• This function is only availablewith digital channels from an Antenna / RF/Coax connection (p. 22).• Remove the base stand from the TV and reassemble it.• Tile Channel menu is only availabb when the TV source is selected.• If the TV b in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Changethe settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press theSOURCE button to select TV mode, and go to MEHU _ Setup _ Plug & Play _ EHTER _ (p.8).• Check the cable connections and reconnect them.• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables areflexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90degree connectors.• This is part of the product's design and is not a defect.• Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 8).Some of above pictures and functions are available at specific models only.Storage and MaintenanceIf you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it towatch TV.The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screencarefully using the cloth provided or a soft cloth to prevent scratches.6 English