Settings 133Phone SettingsRemember to always turn your phone on and check for adequate signal strengthbefore placing a call.Note: When you dial an emergency number, you phone locks itself to the emergency location that answeredthe call and locks itself in 911-Only mode, blocking from dialing any number but an emergencynumber.Store Emergency Numbers1. In standby mode, press the MENU key ( ), then press (forSettings), (for Phone Settings), and for Security.The “Enter Code” prompt appears in the display.2. Enter the four-digit lock code using the keypad.Note: The default lock code is the last four digits of your mobile phone number.The “Enter Code” prompt disappears and the Security menu appears inthe display.3. Press for Emergency #.4. Press , , or to select one of the three emergencynumbers.5. Enter the emergency number (up to 32 digits in length).6. Press to save the number that you entered.7. Press Cancel (right) soft key ( ) to discard your entry and return to theprevious menu.Call Emergency Numbers in Lock Mode1. In standby mode, enter the emergency number via the keypad.2. Press to place the call.Reset PhoneReset Phone returns all setup parameters (except for the phonebook entries) to theirfactory default values.Caution!: Before selecting Reset Phone, contact your Wireless Carrier. Invoking Reset Phone may erasesettings made by your Wireless Carrier from your phone, resulting in loss of service.1. In standby mode, press the MENU key ( ), then press (forSettings), (for Phone Settings), and for Security.The “Enter Code” prompt appears in the display.wxyzjkl defdef@ abc defSENDwxyzjkl def
