English - Connection Panel (depending on the model)☛ Whenever you connect an audio or video system to yourtelevision, ensure that all elements are switched off.Please be sure to match the color coded input terminalsand cable jacks.Connecting to an Aerial or Cable Television NetworkConnect the aerial or network input cable to the 1 (75 Ωcoaxial socket).To view television channels correctly, a signal must bereceived by the set from one of the sources: an outdooraerial, cable television network, or satellite network.If you are using an indoor aerial, you may need to adjust itwhen tuning your television until you obtain a picture that isboth sharp and clear.Rear Panel☛ Please be sure to match the colour coded input terminalsand cable jacks.Connecting to the RCA InputThe 3 (AUDIO-L/R) and 2 (VIDEO) connectors are usedfor equipment, such as a camcorder, video disc player, orvideo game device.Connecting to the S-Video InputThe 1 (S-VIDEO input) and 2 (VIDEO input) connectorsare used for equipment with an S-Video output, such as acamcorder or VCR.➢ When both the front (or side) AV and rear connectors areconnected to external equipment, the front (or side) AVreceives priority.COLOUR TELEVISIONCS29Z40 / CS29Z45 / CS29Z47 / CS29Z50 /CS29Z57 / CS29Z58 / CS29A730 /CS29A760 / CS29A750Owner’s InstructionsBefore operating, please read this manual thoroughly,and retain it for future reference.Register your product atwww.samsung.com/global/register➢ The actual configuration of your TV may be different,depending on your model.Control Panel (depending on the model) You can use the 3 buttons to switch the TV on when it isin standby mode depending on the model. The 2 and 3 buttons also have the same function asthe ◄/►/▲/▼ buttons on the remote control. If the remote control no longer works or you havemisplaced it, you can use the controls on the panel of thetelevision.Front (or Side) Panel1 On-screen menu display2 Volume adjustment3 Channel selection4 Remote control sensor5 Standby indicator6 Power on/offAA68-004001A-001 S-Video input2 Video input3 Audio inputFront (or Side) Panel➢ The actual configuration of your TV may be different,depending on your model.Connecting to the RCA OutputThe RCA2 connectors are used for equipment, such as arecording VCR or audio system.Connecting to the RCA InputThe RCA3 and RCA4 connectors are used for equipment,such as a VCR, DVD, decoder, satellite receiver, videogame device, or video disc player. (When using the monoequipment, connect to the AUDIO-L input connector.)The RCA5 connectors are used for equipment such as aDVD with component output (480i only).cable televisionnetworkorcable televisionnetworkorOUTAV IN / OUTVIDEOIN 2IN L - AUDIO - RCOMPONENT IN(480i/480p/576i/576p/�720p/080i/080p)YPBPRAA68-04001A-00Eng_0707.indd 1 2008-07-07 오전 11:54: