Samsung SyncMaster 400DXN-2 Quick Start Manual

Also see for 400DX - SyncMaster - 40" LCD Flat Panel Display: Brochure & specs Quick guide Owner's manual Specifications Quick start guide

Contents

Using the BNC (Analog) connector on the video card. (Applicable tothe DX-2 model only)• Connect the BNC/COMPONENT IN port on the monitor to the BNC porton the PC using the BNC to BNC cable.Connect the audio cable for your LCD Display to the audio port on the backof the LCD Display.Connect the power cord for your LCD Display to the power port on the backof the LCD Display. Turn on the power switch.Note• Turn on both your computer and the LCD Display.• Contact a local SAMSUNG Electronics Service Center to buy optional items.Connecting to Other devicesNote• AV input devices such as DVD players, VCRs or camcorders as well as your computercan be connected to the LCD Display. For detailed information on connecting AV inputdevices, refer to the contents under Adjusting Your LCD Display.• The LCD Display 's configuration at the back may vary slightly depending on the LCDDisplay model.Connecting AV DevicesConnections