Samsung SyncMaster 400MX User Manual

Also see for 400MX - SyncMaster - 40" LCD Flat Panel Display: Brochure & specs Specifications Control protocol User manual User manual

4. Select the "Monitor" tab.5. Click the "Change" button in the "Monitor Type" area.6. Choose "Specify the location of the driver".7. Choose "Display a list of all the driver in a specific location..." then click "Next" button.8. Click the "Have Disk" button.9. Specify A:\(D:\driver) then click "OK" button.10. Select "Show all devices" and choose the monitor that corresponds to the one you con-nected to your computer and click "OK".11. Continue choosing "Close" button and "OK" button until you close the Display Propertiesdialogue box.Microsoft® Windows® NT Operating System1. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon.2. In Display Registration Information window, click Settings Tab and then click "All DisplayModes".3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)and then click "OK".4. Click "Apply" button if you see the screen working normally after clicking "Test". If thescreen is not normal, change to a different mode (lower mode of resolution, colors orfrequency).NoteIf there is no Mode at All Display Modes, select the level of resolution and vertical frequencyby referring to the Preset Timing Modes in the user guide.Linux Operating SystemTo execute X-Window, you need to make the X86Config file, which is a type of system settingfile.1. Press "Enter" at the first and the second screen after executing the X86Config file.2. The third screen is for setting your mouse.3. Set a mouse for your computer.4. The next screen is for selecting a keyboard.5. Set a Keyboard for your computer.6. The next screen is for setting your monitor.7. First of all, set a horizontal frequency for your monitor. (You can enter the frequencydirectly.)8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)9. Enter the model name of your monitor. This information will not affect the actual executionof X-Window.Using the Software