Samsung SyncMaster 400TS-3 User Manual

Also see for SyncMaster 400TS-3: User manuals User manuals Quick start guide

Contents

• Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.• Gateway : Manually enter the Gateway if IP Setting is set to Manual.MagicInfoAvailable Modes• PC / DVI / DisplayPort• AV• Component• HDMI• MagicInfo• TVNote• MagicInfo can only be enabled when a network box(sold separately) is connected.• A TV tuner box (sold separately) must be connected to use the TV. (US Only)Note• The remote control can be used to select MagicInfo. However, it is recommended to use a separateUSB keyboard to utilize MagicInfo fully.• For MagicInfo in Device mode, moving external devices while booting may cause errors. Set upexternal devices only if the LCD Display turns on.• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the Program(MagicInfo) may stop. If you do unplug the cable, restart the system.• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the Program(MagicInfo) may stop.• To access other sources, press the SOURCE button in MagicInfo.• The preset password for the LCD Display is "000000".• The server Program's Power-On option works only if the LCD Display's power is completely shutoff.Please make sure not to use the Power-On option when the LCD Display is in the process of shuttingdown since this may cause system errors on the LCD Display.• When using MagicInfo with the MagicInfo Server Program: perform Network mode.• When using MagicInfo with the device directly connected to LCD Display : execute Device mode.• Press ESC to directly go to the MagicInfo Window screen.• To setup MagicInfo on a Windows screen, a keyboard and mouse are required.• To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help.Adjusting the LCD Display