Samsung SyncMaster 400UXN-2 User Manual

Also see for SyncMaster 400UX-2: Quick start guide Specifications Service manual Quick start guide Quick start guide

SOURCE button [SOURCE]Switches from PC mode to Video mode. Selects the input source that anexternal device is connected to.[PC] → [DVI] → [AV] → [Component] → [HDMI] → [MagicInfo]Note• The BNC mode will not be activated on the UXN-2 model.• MagicInfo supports the UXN-2 model only.PIP buttonPush the PIP button to turn the PIP screen On / Off.More than one PIP cannot overlap on screen as BNC and the componentuse the same terminal.• PC : DVI / AV / Component / HDMI• BNC : DVI / AV / HDMI• DVI / AV : PC / BNC• Component : PC• HDMI : PC / BNCPower button [ ]Use this button for turning the LCD Display on and off.Brightness Sensor (Optional)Automatically detects the surrounding brightness it accordingly.NoteThis function is activated only on the models equipped with an auto bright-ness sensor.Power indicatorShows PowerSaver mode by blinking greenNoteSee PowerSaver described in the manual for further information regardingpower saving functions. For energy conservation, turn your LCD DisplayOFF when it is not needed or when leaving it unattended for long periods.Remote Control SensorAim the remote control towards this spot on the LCD Display.RearNoteFor detailed information concerning cable connections, refer to Connecting Cables underSetup. The LCD Display 's configuration at the back may vary slightly depending on the LCDDisplay model.Introduction