• OpaqueEdit NameName the input device connected to the input jacks to make your input source selectioneasier.VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver /Game /Camcorder / DVD Combo / DHR / PC / DVI DevicesNote• The displayed devices differ depending on the external input mode.• When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, setEdit Name to AV. However, since 640x480, 720P (1280x720), and 1080p (1920x1080)are common signals for AV and PC, make sure to set the Edit Name in accordance withthe input signal.• The Picture menu changes depending on the input signal and Edit Name.When using a DVI to HDMI cable connection (which does not support audio and video atthe same time), the audio port should be connected via a separate audio cable.When a PC is connected, set Edit Name to DVI PC to enjoy the video and audio from theconnected PC.When an AV device is connected, set Edit Name to DVI Device to enjoy the video andaudio from the connected AV device.Source AutoSwitch SettingsTurning on the display with Source AutoSwitch On, and the previous video source selectionis not active, the display will automatically search the different video input sources for activevideo.Note• If the display TV source is active (TV tuner connected to the display) the Source AutoS-witch search function becomes inactive. The display will remain in the TV source.• Source AutoSwitch selection and PIP function: If the Source AutoSwitch selection isset to On, the PIP function will not work, the Source AutoSwitch selection must be setto Off, for the PIP feature to work.• When the Source AutoSwitch selection is On, and or the Primary Source Recovery isOn, the display power saving mode becomes inactive.• When Primary Source Recovery is On, only the Primary Source and SecondarySource selection are available and they are interchangeable and selectable at will.Adjusting the LCD Display