Samsung SyncMaster 460TS-3 User Manuals

Picture PC1. Click Settings of the main icons and the Settings Control screen appears.Basic information required to adjust settings is displayed. Settings for the corresponding SET will be importedand displayed on the slider if a display ID is selected, and the default settings will be displayed if all display IDsare selected by clicking All and Select. If a value is changed in this screen, the current mode will automaticallyswitch to custom mode.1) Picture PC- Available only for PC, BNC, DVI and DP.2) Contrast- Adjusts Contrast of the selected display.3) Brightness- Adjusts Brightness for the selected display.4) Red- Adjusts red Color of the selected display.- Available only for NT.5) Green- Adjusts green Color of the selected display.- Available only for NT.6) Blue- Adjusts blue Color of the selected display.- Available only for NT.7) Color Tone- Adjusts the Color Tone for the selected display.8) Color Temp- Adjusts the Color Temp for the selected display.9) Brightness Sensor- Adjusts the Brightness Sensor for the selected display.10) Dynamic Contrast- Adjusts the Dynamic Contrast for the selected display.Brightness Sensor may not be supported depending on the product.The Input source of MagicInfo works only on MagicInfo model.The Input source of TV works only on TV model.Color Temp is only enabled if the Color Tone is set to Off.This feature is available only for the displays whose power status is ON and if no selection ismade, the factory default is displayedDP may not be supported depending on the product.