80• Go To : accesses all the features of your phone if they are activated, such as: Web, Calendar, Sounds,Tasks, Contacts, Voice mail, and Games and Apps.• Check : lets you check your phone's status in the same report (Status, Messages, Missed Calls, Time, SignalStrength, Network, Battery, My Phone Number, and Volume).While the Say a command screen displays you have two options:• Tutorial: provides examples of how to use the voice commands.• Settings: lists the settings for voice command software such as: Confirmation, Adaptation, Audio Modes, Speakerphone, andAbout.If the phone does not recognize your command the Command not recognized screen displays with two options:• Restart: touch and try the command options again.Speak clearly when giving your command. There is no need for you to speak slowly or with added emphasis. Thevoice recognition software has been optimized to understand your speech in its natural form. If it does not recognizeyour command after a few seconds, a voice prompt asks you to repeat the command. If it does not recognize yourcommand again, the following message displays “Sorry, no match found,” and voice recognition turns off.Important!: You must end your current Voice Commands call before you can make another call.Voice Recognition Tips• Wait for the tone before you speak.• Speak clearly and at a normal volume.• There is no need to use paused speech. The voice recognition software has been trained to recognize naturalspeech, and performs best when you speak naturally.• In very noise environments, it may be helpful to use the supplied earset or optional Bluetooth headsets.Contacts List Voice ActivationOn startup, Nuance reads your Contacts list and voice-activates all the names.When you have add or change contacts, Nuance automatically reloads and voice-activates the list when you add ormodify a contact.Name DialingTo use Name Dial, you need entries stored in your Contacts. For information on creating Contacts entries, see“Storing a Number in the Phone’s Memory” on page 39.T746 UG.book Page 80 Tuesday, March 23, 2010 8:42 AM