In order to watch television programmes broadcast via a satellitenetwork, you must connect a satellite receiver to the TV set.➢ If you wish to connect both a satellite receiver and aVCR, you should connect the: Receiver to the VCR VCR to the television(see pages 44~47 for further details)Otherwise, connect the receiver directly to the television.Using a SCART cableConnect the receiver SCART cable to one of the SCART connectorson the rear of the television (see page 44 for further details on thevarious connection possibilities).Using a coaxial cableConnect a coaxial cable to the: Receiver output socket. Television aerial input socket.In order to descramble a coded transmission signal, you mustconnect a decoder to the TV set.➢ If you wish to connect both a decoder and a VCR, youshould connect the: Decoder to the VCR VCR to the television(see pages 44~47 for further details)Otherwise, connect the decoder directly to the television.Using a SCART cableConnect the receiver SCART cable to one of the SCART connectorson the rear of the television (see page 44 for further details on thevarious connection possibilities).Using a coaxial cableConnect a coaxial cable to the: Receiver output socket. Television aerial input socket.10ENGConnecting a Satellite ReceiverConnecting a DecoderEXT3(DECODER)EXT2(VCR)EXT1AV-link75ΩVHF/UHFRear of the TVSatellite receiverEXT3(DECODER)EXT2(VCR)EXT1AV-link75ΩVHF/UHFRear of the TVDecoderoror
