S P E C I A L F E AT U R E SEnglish - 64Customizing Your Remote ControlYour TV comes equipped with a universal remote control. In addition to controlling the TV,the universal remote control can also operate a VCR, Cable box, DVD, and some SamsungSet-top boxes (even if your VCR, Cable box and DVD are made by manufacturers other thanSamsung).1Turn off your VCR (Cable box or DVD player).2Press the MODE button to switch the remote control to the VCR (CABLE orDVD) mode.œ The remote control has fivemodes: TV, STB, VCR,CABLE, and DVD.3On your Samsung remote control, press the SET button.4Enter 3 digits of the VCR (Cable box or DVD player) code listed on next pagefor your brand of VCR (Cable box or DVD player).œ Make sure you enter 3 digitsof the code, even if the firstdigit is a “0”. (If more thanone code listed, try the firstone.)5Press the POWER button on the remote control. Your VCR (Cable box orDVD player) should turn on. If your VCR (Cable box or DVD player) turns on,your remote control is now set correctly.œ If your VCR (Cable box orDVD player) does not turnon, repeat steps 2, 3, and 4,but try one of the other codeslisted for the brand of yourparticular VCR (Cable box orDVD player).6Once your remote control is set up, press the MODE button any time youwant to use the remote to operate your VCR (Cable box or DVD player).• When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP,PLAY/PAUSE, and FF) will still operate your VCR (or DVD player).• When your remote control is in the STB, VCR, CABLE, or DVD mode, the volume buttons stillcontrol your TV’s volume.Setting Up Your Remote Control to Operate Your VCR (Cable boxor DVD player)
