O P E R AT I O NEnglish - 31Storing Channels in Memoryœ The TV must be connectedto an antenna in order toreceive digital TV signals.Even if a particular channelis deleted from the memory,you can always tune to thatchannel directly by usingthe number buttons on theremote control.6Press the ENTER button tostart the auto program.The TV begins memorizingall available channels.Press the ENTER button atany time to interrupt thememorization process.Press the EXIT button to exit.5Press the ▲ or ▼button to select theantennas to memorize.Press the ENTER buttonto select “Start”.4Press the ▲ or ▼ buttonto select the antennaconnection, then press theENTER button.When selecting Cable TV system:Press the ▲ or ▼ buttonto select “Cable”, thenpress the ENTER button.Press the ▲ or ▼ buttonto select “STD”, “HRC”, or“IRC”, then press theENTER button.Select the cable systemSTDHRCIRCT V Auto ProgramChannel Memory in ProcessAir Channel 15StopAuto ProgramT V Auto ProgramSelect the antennas to memorizeAirCableAir + CableS t a r tS t a r tS t a r tT V Auto ProgramSelect the antennas to memorizeAirCableAir + CableS t a r tS t a r tS t a r tT V Auto ProgramSelect the antennas to memorizeAirCableAir + CableS t a r tS t a r tS t a r tœ Air : “Air” antennasignalCable : “Cable” antennasignalAir+Cable: “Air” and “Cable”antenna signalsœ STD, HRC, and IRCidentify various types ofcable TV systems. Contactyour local cable companyto identify the type of cablesystem that exists in yourparticular area.• All available DTV and analog channels are automatically storedin memory when channels are selected by the direct tuningfunction.
