Samsung TX-T2085 Owner's Instructions Manual

Also see for TX-T2082: Manual Owner's instructions

English - 17Checking the Digital-Signal Strength - DigitalUnlike analog channels, which can vary in reception quality from “snowy” to clear,digital(HDTV) channels have either perfect reception quality or you will not receive them atall. So, unlike analog channels, you cannot fine tune a digital channel. You can, however,adjust your antenna to improve the reception of available digital channels.1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Channel, then press the ENTER button.2 Press the ▲ or ▼ button to select Signal Strength, then press the ENTER button.If the signal strength meter indicates that the signal is weak, physically adjust your antennato increase the signal strength. Continue to adjust the antenna until you find the best positionwith the strongest signal.Press the EXIT button to exit.You can also press the ENTER button to select OK, then press the EXIT button to exit.Using the R.Surf FeatureThis feature allows you to set the TV to return to a particular channel after a certain amountof time. For example, you may be watching a channel when commercials start. You can setthe R.Surf to “5 minutes”, then switch channels. After 5 minutes, the TV will return to theoriginal channel. To use the R.Surf feature:1 While you are watching the channel to which you want to return, press the R.SURF button.The Surf Off is displayed.2 Press the R.SURF button again to set the timer in thirty second intervals, up to five minutes.➢ The time will start decreasing while you are setting up the timer, and will reset after5 minutes has passed or you turn it off.3 The time you set will begin counting down on the screen.When the time runs out, the TV will return to the channel you were watching when you set thetimer.Selecting a Menu Language1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Setup, then press the ENTER button.2 Press the ▲ or ▼ button to select Language, then press the ENTER button.3 Press the ▲ or ▼ button to select the appropriate language: English, Español or Français,then press the ENTER button.Press the EXIT button to exit.Function DescriptionEnter ReturnSignal StrengthOKSurf 00: 29Move Enter ReturnLanguageEnglishEspañolFrançais