CHAPTER FOUR: SPECIAL FEATURES 4.3S P E C I A L F E AT U R E SCable BoxCodes4Enter both digits of the cable box code listed below for yourbrand of cable box.Make sure you enter both digitsof the code, even if the first digit is a“0.” (If more than one code listed,try the first one.)5Press the POWER button. Your cable box should turn on. If yourcable box turns on, your remote control is now “set up” correct-ly.If your cable box does not turnon, repeat steps 2, 3, and 4, but tryone of the other codes listed for yourparticular brand of cable box. (If noother codes are listed, try each cablebox code, 00 through 35.)6Once your remote control is set up, press the CABLE buttonany time you want to use the remote to operate your cablebox.When your remote control isin the “CABLE” mode, the volumebuttons still control your TV’s vol-ume. Also, the VCR control buttons(PLAY, PAUSE, etc.) will still operateyour VCR.2On your Samsung remote control, press the SET button.3Press the CABLE button on the top right of your remotecontrol.The remote control has three“modes”: “TV,” “VCR,” and“CABLE”.Press the “CABLE” button to switchthe remote control to the “Cable”mode.1Turn off your cable box.Setting Up Your Remote Control to Operate Your Cable Box
