2.3 CHAPTER T WO : I NSTALLATIONI N S TA L L AT I O N This terminal might be labeled“ANT OUT,” “VHF OUT,” or simply,“OUT.” This terminal might be labeled“ANT IN,” “VHF IN,” or simply,“IN.”Connecting to a Cable Box that Descrambles All Channels1Find the cable that is con-nected to the ANTENNAOUT terminal on yourcable box.2Connect the other end ofthis cable to the VHF/UHFantennaterminal on the back ofthe TV.Connecting to a Cable Box that Descrambles Some ChannelsIf your cable box descrambles only some channels (such as premium channels), follow theinstructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths ofcoaxial cable. (These items are available at most electronics stores.)1Find and disconnect thecable that is connected tothe ANTENNA INterminal on yourcable box.2Connect this cable to atwo-way splitter.3Connect a coaxial cablebetween an OUTPUT ter-minal on the splitter andthe IN terminal on thecable box.

safety instructions

List of Features

Familiarizing Yourself with The TV

Front Panel Jacks

Rear Panel Jacks

Remote Control

number buttons

Connecting VHF and UHF Antennas

Antennas with 75-ohm Round Leads

All Channels

Connecting a VCR

Connecting an S-VHS VCR

Connecting a Second VCR to Record from the TV

Connecting a Camcorder

Installing Batteries in the Remote Control

Turning the TV On and Off

Viewing the Menus and On-Screen Displays

Selecting a Menu Language

Memorizing the Channels

Storing Channels in Memory (Automatic Method)

Adding and Erasing Channels (Manual Method)

Changing Channels

Labeling the Channels

Setting the Clock

Automatically Set the TV Clock

Customizing the Picture

Using Automatic Picture Settings

Customizing the Sound

Using Automatic Sound Settings

viewing an external signal source

Customizing Your Remote Control

vcr codes

Operate Your Cable Box

Fine Tuning Channels

Digital Noise Reduction

Changing the Screen Size

changing the color tone

Using the R.Surf

Setting the On/Off Timer

Setting the Sleep Timer

Sound Features

Viewing Closed Captions

Viewing Picture-in-Picture

Selecting a Signal Source (External A/V) for PIP

Changing the Size of the PIP Window

Swapping the Contents of the PIP image and Main image

Changing the PIP Channel

Setting Up Your Personal ID Number (PIN)

How to Enable/Disable the V-Chip

a Channel ("Emergency Escape")

viewing the demonstration

Identifying Problems

Cleaning and Maintaining Your TV

Samsung Tantus TXM 3098WHF Owner's Instructions Manual

Side Panel Jacks

Connecting to a Cable Box that Descrambles All Channels

Connecting a Digital TV Set-Top Box (480p/1080i)

Connecting to DVI (Digital Visual Interface)

Viewing an External Signal Source

Setting Up Your Remote Control to Operate Your Cable Box

LNA (Low Noise Amplifier)

Tilt

Changing the Color Tone

Using the R.Surf Feature

Choosing a Multi-Channel Sound (MTS) Soundtrack

Using the V-Chip (USA)

G, PG, PG-13, R, NC-17, X

Blocks a Channel ("Emergency Escape")

Using the V-Chip (Canada)

How to Set up Restrictions Using the "TV guidelines

How to Set up Restrictions Using the Canadian English

How to Set up Restrictions Using the Canadian French

Viewing the Demonstration

Tantus TXN 3098WHF

TXM2796HF

TXM2797HF

TXM2798HF

TXM3096WHF

TXM3097WHF

TXM3098WHF

TXM3281HF

TXM3296HF

TXM3297HF

TXM3298HF

TXN2745FP

TXN3245FP