82. Plug the adaptor into a standard AC wall outlet.3. When the phone is completely charged ( ), unplug the charger from thepower outlet.4. Remove the adapter from the phone by gently pulling the connector out.Important!: The battery charging function may stop if you are on a call while charging your battery.Note: Do not remove the battery from the phone during charging. You must unplug the adapterfrom the phone before removing the battery to avoid damage.Turning the Phone On or Off1. Press and hold the key until the phone power-on screen displays.Note: Do not turn on the phone when mobile phone use is prohibited.2. If the phone asks, enter a password and press the OK soft key or the key.(For further details, see “Change Phone Password” in the phone Securitysection on page 51.)The Idle screen displays while the phone searches for your network. Thesignal strength bars show adequate signal after a network is found.Note: T he display language is preset to Automatic at the factory. To change the language, use theLanguage menu. For more information, see Phone settings on page 50.3. When you wish to switch off the phone, press and hold the key.Setting Up Your Voice Mail In Idle mode, press and hold the key. When connected, follow the voiceprompts from the voice mail center.