Samsung UE22F5000 User Manual

Also see for UE19F4000: User manual User manual

Contents

EnglishConnecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)To watch paid channels, the “CI or CI+ CARD” must be inserted.• If you do not insert the “CI or CI+ CARD”, some channels will displaythe message “Scrambled Signal”.• The pairing information containing a telephone number, the “CI orCI+ CARD” ID the Host ID and other information will be displayed inabout 2~3 minutes. If an error message is displayed, please contactyour service provider.• When the configuration of channel information has finished, themessage “Updating Completed” is displayed, indicating the channellist is updated.• The image may differ depending on the model.✎ NOTE• You must obtain a “CI or CI+ CARD” from a local cable service provider.• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may causedamage to it.• Insert the “CI or CI+ CARD” in the direction marked on the card.• The location of the COMMON INTERFACE slot may be different depending on the model.• “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.• If you have any problems, please contact a service provider.• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.Initial SetupWhen the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Setup is available only when the source is set to TV.✎ If you connect any device to HDMI IN 1(STB) before starting the installation, Channel Source will be changed to Set-top boxautomatically. If you do not want to select Set-top box, please select Aerial.If You Want to Reset This Feature...Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PINnumber, use the Change PIN function.You should do Setup (MENU → System) again at home even though you did in shop already.✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to“0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on)Changing the Input SourceSourceTV / Ext. / HDMI1 / HDMI2/DVI / AV / ComponentUse to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.✎ Press the SOURCE button. In the displayed Source list, connected inputs will be highlighted.✎ PC(D-Sub) input is not supported. If you want to connect PC to the TV, you can connect the HDMI to DVI cable with the HDMI IN2(DVI) port on the TV.✎ Ext. always stays activated.✎ Press the TOOLS button.• Edit NameYou can set an external input source name you want.– When connecting a PC to the HDMI IN 2(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.– When connecting a PC to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode underEdit Name.– When connecting an AV devices to the HDMI IN 2(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devicesmode under Edit Name.• InformationYou can see detailed information about the connected external device.English - 7[UF40005000S-XH]BN68-04904C-02L09.indb 7 2013-11-20 4:50:12