English - 15Connecting to a COMMON INTERFACE slot(Your TV viewing Card Slot)- Turn the TV off to connect or disconnect a CI card.- 2 CI card slots are available, depending on the model.Using the “CI or CI+ CARD”To watch paid channels, the “CI or CI+ CARD” must beinserted.- If you don’t insert the “CI or CI+ CARD”, some channels willdisplay the “Scrambled Signal” message.- The pairing information containing a telephone number,the “CI or CI+ CARD” ID, the Host ID, and other informationwill be displayed in about 2~3 minutes. If an error messageis displayed, please contact your service provider.- When the configuration of channel information hasfinished, the message “Updating Completed” is displayed,indicating the channel list is updated.NOTE- You must obtain a “CI or CI+ CARD” from a local cable service provider.- When removing the “CI or CI+ CARD”, carefully pull it out as dropping the “CI or CI+ CARD”may damage it.- Insert the “CI or CI+ CARD” in the direction marked on the card.- The location of the COMMON INTERFACE slot may differ depending on the model.- A “CI or CI+ CARD” is not supported in some countries and regions, therefore, check withyour authorised dealer.- If you have any problems, please contact a service provider.- Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will bedistorted or will not be visible.