Samsung UH026EAV Installation Manual

Also see for UH026EAV Series: Service manual Service manual Installation manual Service manual

Contents

E-17ENGLISHUsing stop valveCapServiceportAxis Sealingpoint When you use the service port, always use a charging hose, too. Check the leakage of refrigerant gas after tightening the cap. Must use a spanner and wrench when you open/tighten the stop valve.CCCC AAAA UUUU TTTT IIII OOOO NNNNTo Open the Stop ValveTo Close the Stop ValveOpen the cap and turn the stop valve counterclockwise by using a hexagonalwrench.Turn it until the axis is stopped.12Tighten the cap securely.3 Do not apply excessive force to the stop valve and always usespecial instruments. Otherwise, the stopping box can bedamaged and the back sheet can leaks. If the watertight sheet leaks, turn the axis back by half, tightenthe stopping box, then check the leakage again. If there is noleakage any more, tighten the axis entirely.NNNN oooo tttt eeeeRemove the cap.Turn the stop valve clockwise by using a hexagonal wrench.12Tighten the cap securely.4Tighten the axis until the valve reached the sealing point.3