English - 22Setting up the TV with your PCPreset: Press the SOURCE button to select PC mode.Auto AdjustmentUse the Auto Adjust function to have the TV automatically adjust the video signals it receives.The function also automatically fine-tunes the settings and adjusts the frequency values andpositions.Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustmentby selecting Tools → Auto Adjustment.This function does not work in DVI-Digital mode.ScreenCoarse / FineThe purpose of picture quality adjustment is to remove or reduce picture noise. If the noise isnot removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) andFine-tune again. After the noise has been reduced, readjust the picture so that it is aligned onthe center of screen.PC PositionAdjust the PC’s screen positioning if it does not fit the TV screen.Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjustthe Horizontal-Position.Image ResetYou can replace all image settings with the factory default values.¦N❑TN❑■■■Brightness : 45Sharpness : 50Auto Adjustment ▶ScreenAdvanced SettingsPicture OptionsPicture ResetPictureCoarse 50Fine 0PC PositionImage ResetU Move E Enter R ReturnScreen
