Using Anynet+ (HDMI-CEC)Use Anynet+ (HDMI-CEC) to control all external devices that support HDMI-CEC using just the TV'sremote control. Note that Anynet+ (HDMI-CEC) only works with the TV's remote control and not withthe panel keys." This function is not available on certain models in specific geographical areas." Anynet+ cannot be used to control external devices that do not support HDMI-CEC." Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not supportAnynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable." The TV remote control may not function under certain circumstances. If this occurs, select the Anynet+device again." Anynet+ (HDMI-CEC) only works with external devices that support HDMI-CEC and only when thosedevices are either in standby mode or turned on." Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type). Withhome theater systems, however, the number of systems that can be controlled is limited to one." To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI cable andthe device's digital audio output connector directly to the home theater system." A home theater system that has been connected to the TV using an HDMI cable and an optical cablesupports 2-channel audio only. 5.1-channel audio is, however, available for digital broadcasts with5.1-channel audio.Setting Up Anynet+ (HDMI-CEC)MENU > System > Anynet+ (HDMI-CEC) Try Now● Anynet+ (HDMI-CEC) Try NowEnables/disables Anynet+ (HDMI-CEC). Set to Off to disable all Anynet+ related features. Set toOn to enable all Anynet+ related features.● Auto Turn Off Try NowWhen set to Yes, turns off Anynet + compatible external devices when the TV is turned off." Some Anynet + compatible devices do not support this feature.● Device search Try NowAutomatically search for and identify Anynet+ (HDMI-CEC) compatible external devices that areconnected to the TV.
