Samsung UN46C8000 User Manual

Also see for UN46C8000: Available Apps User manual User manual User manual User manual

Contents

35English04 Advanced Features9. When done, press the Blue button on your remote. TheNetwork Connecting screen appears.10. Wait until the connection confirmation message isdisplayed, and then press the ENTERE button. TheNetwork Setup screen re-appears.11. To test the connection, press the RETURN button toselect Network Test, and then press the ENTEREbutton.Network Setup (Ad-Hoc)You can connect to a mobile device without an access pointthrough the “Samsung Wireless LAN Adapter” by using apeer to peer network.✎ This function is available when SWL (SamsungWireless Link) is set to Off in the TV’s on-screenmenu.How to connect to new Ad-hoc device1. Follow Steps 1 through 6 in the “How to set up usingPBC (WPS)” (p. 34).2. Choose Select a Network. A list of devices/networksappears.3. While in the device list, press the Blue button on theremote.✎ The message Ad-hoc is a direct Wi-Ficonnection with cell phone or PC. The existingnetwork system may have limited functionality.Do you want to change the networkconnection? is displayed.4. Input the generated Network Name (SSID) andSecurity Key into the device you want to connect.How to connect an existing Ad-hoc device1. Follow Steps 1 through 6 in the “How to set up usingPBC (WPS)” (p. 34).2. Choose Select a Network. The Device/Network listappears.3. Select the device you want in the Device list.4. If security key is required, input the security key.✎ If network doesn’t operate normally, checkthe Network Name (SSID) and Security Keyagain. An incorrect Security Key may cause amalfunction.Network Setup (Manual)If the other methods do not work, you need to enter theNetwork setting values manually.Getting the Network Connection ValuesTo get the Network connection values on most Windowscomputers, follow these steps:1. Right click the Network icon on the bottom right of thescreen.2. In the pop-up menu, click Status.3. On the dialog that appears, click the Support tab.4. On the Support tab, click the Details button. TheNetwork settings are displayed.How to set up manuallyTo enter the Network connection values manually, followthese steps:1. Follow Steps 1 through 6 in the “How to set up usingPBC (WPS)” (p. 34).2. Press the button to select Internet Protocol Setup,and then press the ENTERE button. Press the or button to select Manual, and then press theENTERE button.3. Press the button to go to the first entry field (IPAddress).4. Use the number buttons to enter numbers.5. When done with each field, use the button to movesuccessively to the next field. You can also use the otherarrow buttons to move up, down, and back.6. Enter the IP Address, Subnet Mask, and Gatewayvalues.7. Press the or button to go to DNS.8. Press the button to go to the first DNS entry field.Enter the numbers as above.9. When done, press the button to go to Select aNetwork. Select your network, and then press theENTERE button.10. Go to Step 4 in the “How to set up automatically” (p.34), and follow the directions from that point on.|j_WWWTuhiu]_TWY^XYhTW]sWZUGGGZ\ YWXWTW`TWXGGG㝘㤸GXWa[^aXZ