Setting up as an Anynet+ (HDMI-CEC)-enabled device1. Press the SOURCE button. The Source screen appears. Select a connected device, and then pressthe down directional button.2. Select Anynet+ (HDMI-CEC) from the menu. The selected device is set up as an Anynet+ (HDMI-CEC)-enabled device. The following menu options are available." The menu options displayed on the menu may differ by external device.● Anynet+ (HDMI-CEC)Sets up the selected device as an Anynet+ (HDMI-CEC)-enabled device, and then displays a listof all external devices connected to the TV. If you select an external device in the list, it is usedas the input source. If you select View TV, the TV exits Anynet+ (HDMI-CEC) so that you canwatch regular TV without interference from any external device.Read before connecting an Anynet+ (HDMI-CEC)" You can configure the TV's Universal Remote to control to control third-party cable boxes, Blu-ray players,and home theaters that do not support HDMI-CEC. For more information, refer to "Controlling ExternalDevices with the TV Remote - Using the Universal Remote."" Anynet+ cannot be used to control external devices that do not support HDMI-CEC." Anynet+ (HDMI-CEC)-enabled devices must be connected to the TV with an HDMI cable. Note that someHDMI cables may not support Anynet+ (HDMI-CEC)." The TV remote control may not work under certain circumstances. If this occurs, set up the device as aAnynet+ (HDMI-CEC)-enabled device again." Anynet+ (HDMI-CEC) works only with external devices that support HDMI-CEC and only when thosedevices are either in standby mode or turned on." Anynet+ (HDMI-CEC) can control up to 12 compliant external devices (up to 3 of the same type) except forhome theaters. Anynet+ (HDMI-CEC) can control only one home theater system." To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI cable andconnect a 5.1 home theater system directly to the TV's digital audio output connector.
