Samsung UN55B8000 User Manual

Also see for UN46B8000 - 46" LCD TV: Manual Safety instructions User manual User manual Brochure

Pairing the Remote ControlA process that enables two-way communication between the TV and the remote control when their MAC addresses match after the TVsaved the MAC address of the remote control and vice versa.[][]Auto PairingAn autornatic pairing method that completes the pairing of the TV and the remote control internally without user intervention whena user operates the remote control after purchasing a TV with a RF remote control.If Auto Pairing does not work, refer to the 'Manual Pairing'.When the TV is turned off (Standby mode)1. Press the POWER(V) button on the RF remote control.The remote control enters pairing mode.2. The TV that receives the Power command is turned on.The TV enters pairing mode. Pairing mode is maintained until pairing is complete. '::3. Pairing mode is completed..................... ;" POWER "x{_ A buzzer goes off.When the TV is turned on1. Press any key onthe RF remote control,{_ The remote controlenters pairing mode,{_ After paring is complete, the key pressed by the user transmits the correspondingcommand to the TV,{_ The time taken to complete the pairing and to sendthe commandis lessthan Isecond. 1"_1_.................................2. The TV is already in pairing mode.ATV, the paring of which is not completed, remains in pairing mode while the TV isturned on.3. Pairing mode is completed.A buzzer goes off.Manual PairingYou can pair the TV and the remote control so that the remote control only controls the TV.1. Plug the TV power plug into the power outlet.Turn the TV power switch off.2. Press the PAIRING button on the remote control.Use a sharp object to press the button.Keep a distance of less than 3 feet (1 m) between the TV and the remote control.3. Press the POWER((b) button on the front panel of the TV. The TV is turned on and Pairing with the remote control isautomatically completed.4. Press the remote control buttons to check if the remote control is properly paired.If the remote control does not work, attempt the pairing process again.If the remote control does not work even after the above measures have been taken, press the RESET button, andreplace the batteries.Finding the Remote Control1. Press the Volume (-) button on the front panel of the TV and hold it down for 10 seconds.The TV will transmit a signal to find the remote control.2. The remote control will generate an alarm sound for 30 seconds. Search for the remotecontrol from the location where the sound is heard the loudest.If no sound is heard, please try again.3. If the remote control has been found, press any remote control button to stop the sound.