English - 13Connecting to an Audio DeviceUsing an Optical (Digital) or an Audio (Analog) Cable ConnectionAvailable devices: Digital Audio System, Amplifier, DVD home theater✎ DIGITAL AUDIO OUT (OPTICAL)x When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volumeof both the TV and the system.x 5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH.x When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When theTV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source isa digital component such as a DVD player / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiverand you connected it to the TV via HDMIyou will only hear 2 CH audio from the home theater receiver. If youwant to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STBsatellite receiver directly to an amplifier or home theater.✎ AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.x When connecting, use the appropriate connector.x When you connect an audio amplifier to the AUDIO OUT jacks, decrease the volume of the TV and adjust thevolume level with the amplifier’s volume control.Connecting to a PCUsing an HDMI cable or an HDMI to DVI cable or a D-sub cable✎ Your PC may not support an HDMI connection.OPTICALWRR-AUDIO-LAUDIO INAudio Cable (Not Supplied)Optical Cable (Not Supplied)Digital Audio SystemRed WhiteAmplifier /DVD home theaterAUDIO OUTPC OUTAUDIO OUTDVI OUTHDMI OUTD-Sub Cable (Not Supplied)Audio Cable (Not Supplied)HDMI Cable (Not Supplied)HDMI to DVI Cable (Not Supplied)