BN68-05427A-01QUICK STARTGUIDEWelcome to your new Smart TV!The following instructions cover assembling, connecting, and setting up your new TV. Makesure you have the accessories listed below.Included in this boxRemote Control Stand Parts and CablesSmart Touch Control Power cord RCA adapter x 2Batteries (AAA x 4) Component adapter One connectOne connect cableRemote Control IR extenderAlso included: User manual, 3D Active Glasses, Quick Setup GuideStep 1Attach the TV tothe StandStep 2Connect videodevicesStep 3Using the SmartTouch ControlStep 4Power on andstart the initialsetupWarning: Screens can be damagedfrom direct pressure when handledincorrectly. We recommend lifting theTV by the edges, as shown.Step 1 Attach the TV to the Stand1A Open the package, and take the cushioning outof it. 1B✎ Base may differ depending on the model.✎ Accessories may be located at different positions,depending on the model.x 2Leg Screwsx 8BaseorPut a base, legs and screws off to assemble thestand out of the box.REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV(such as the box).1Cx4 (M4 X L12)LRFit the base and legs together, making sure thatthe legs are correctly aligned with the base. Seethe diagram below.✎ Base may differ depending on the model.1D Insert 2 screws through the base into each leg asshown, and then secure the legs to the base witha screwdriver.✎ Base may differ depending on the model.1E Lay the TV on a soft surface, screen side down.Use the packing material to protect the screen. 1F Holding the stand parallel to the screen, slide thestand legs into the notches on the back of the TV.✎ Base may differ depending on the model.1G x4 (M4 X L12) Insert 4 screws and secure the stand to the TV.✎ Base may differ depending on the model. 1H When placing the product on a console or shelf,make sure that the stand does not protrudebeyond the edge of the console or shelf. Thismay cause the product to fall off and result in amalfunction or injury.