11 Set Network type to Wired and then select Connect.Network SettingsSelect your network type.Network type WiredConnectPlug a network cable intothe back of your TV.21 Select Stop when the TV attempts to connect to the network. Once the network connection hasbeen interrupted, select IP Settings.Network SettingsConnection verification cancelled.Wired network connection test is stopped.Change Network IP Settings Retry Close31 From the IP Settings screen, set IP Setting to Enter manually, enter IP Address, Subnet Mask,Gateway, and the DNS Server values, and then select OK.IP SettingsIP Setting Enter manuallyIP Address 0.0.0.0Subnet Mask 0.0.0.0Gateway 0.0.0.0DNS Setting Enter manuallyDNS Server 0.0.0.0OK Cancel41 The TV attempts to connect to the network again using the specified settings. A confirmationmessage is then shown once a connection is established. Select OK to proceed.
