BN68-05196A-03QUICK STARTGUIDEStep 1 Attach the TV to the Stand1ARemove the product boxes on both sides of Velcrotapes.1BPull apart the cardboard packaging, as shown by thefigure.1CPull the Styrofoam cushioning off of the TV in theorder indicated by the figure.1D 1E1F 1G One person holding the TV in front of the TV, two people can fit intothe hole in the TV. Two people stand the TV, screws into the holes ofthe product. Another one on screws into both sides of the TV.1H 1I1JPull the cushion that is fixed on top of the producttoward the front of the TV. Please remove thecushion up.Pull the clips off of the sides of the frame.1KWelcome to your new Smart TV!The following instructions cover assembling, connecting, and setting up your new TV. Make sureyou have the accessories listed below.Included in this boxOne Connect Accessories:One connect, one connect cableStandAlso included: User manual, regulatory guide, antenna cable,IR extender, component adapter, RCA adapter x 2, power cordSmart Touch Control &Batteries (AAA x 2)DELPHINUS Screwx 8 (M4 x L6)Step 1Attach the TV tothe StandStep 2Connect videodevicesStep 3Using the SmartTouch ControlStep 4Power on andstart the initialsetup3D Glasses Accessories:3D Active glasses, USB charge cable✎ Use the screws that are contained in the accessories box.[UN85S9AF_QSG]BN68-05196A-03ENG.indb 2 2013-08-01 �� 2:30:04