Samsung US12PGGB Owner's Instructions Manual

Also see for AS07PBGE: Training manual

Cooling Your Room1 If necessary, press the (On/Off) button.Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode selectedwhen the unit was last used. The indoor unit beeps.The air conditioner is fitted with a protection mechanism toprevent the unit from being damaged when it is startedimmediately after being: Plugged in Stoppedlt will start up normally after three minutes.IMPORTANTIf the is not displayed at the top of the remote control,press the button on the remote control one or more times until itappears.Result: The indoor unit beeps each time you press the button. The air conditioner runs in COOL mode.2You can change modes at any time.NNNN oooo tttt eeeeTo adjust the temperature, press the button one or more times untilthe required temperature is displayed.Possible temperatures are between 18°C and 30°C inclusive.Result: Each time you press the button:- The temperature is adjusted by 1°C- The indoor unit beeps The air conditioner starts cooling, provided that the roomtemperature is higher than the selected temperature. If the room temperature reaches the set temperature, the airconditioner stops cooling, but the fan is still operating.3Select the fan speed by pressing the button one or more timesuntil the required setting is displayed:Automatic (rotated : )LowMediumHighResult: Each time you press the button, the indoor unitbeeps.4To control the direction of the air flow, refer to pages 16 and 17.5You must select the Cool mode if you wish to adjust the: Cooling temperature Fan speed when coolingE-10