Samsung VACUUM CLEANER Operating Instructions Manual

Contents

Samsung VACUUM CLEANER Operating Instructions Manual Manual pdf 11 page image

EN-10Motor does not start. No power supply. Check cable, plug andsocket.Suction force is gradually Filter, nozzle, suction hose Remove the object.decreasing. or tube is blocked.Cord does not rewind fully. Check that the cord is not Pull the cord out 2~3m &twisted or wound unevenly. push down the cord rewindbutton.PROBLEM CAUSE REMEDYTROUBLE SHOOTINGThis Vacuum cleaner is approved the following.EMC Directive : 89/336/EEC , 92/31/EEC and 93/68/EECLow Voltage Safety Directive : 73/23/EEC and 93/68/EECCYCLONIC FILTER(ONLY CYCLONIC FILTER TYPES)You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and itmaintain the maximum cleaning efficiency.The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned airand dust revolves in the Cyclonic Filter. So the dust bag contains only smaller ones.When the Dust Barrel is filled with dust up to the indicating line, it needs disposing and cleaning.Dust Barrel can be cleaned in water.1. Turn the Dust Barrel to the left and pull it.2. Disconnect the Cyclonic Filter from extension wand and handle.3. Remove thread and hair tangled around the net.4. After cleaning the Dust Barrel and Cyclonic Filter, connect the Cyclonic Filter with extensionwand and handle(washed part should be dried in the shade throughly before assembling.)5. Push and turn the Dust Barrel to the right.Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter.CYCLONICFILTERDUST BARRELCREVICETOOLDJ68-00093P(EN) 11/2/02 11:53 AM Page 11