Samsung VP-D73 Owner's Instruction Book

Also see for VP-D73: Service manual Owner's instruction book Owner's instruction book Owner's instruction book

Contents

ENGLISH68Playing back a TapeZERO MEMORYD The MEMORY function works in both CAMERA and PLAYER modes.D You can mark a point on a tape that you want to return to following playback.1. Press the ZERO MEMORY button on the remote control during playback or recording at the point you want to return to later.n The time code is changed to a tape counter that is set to zero memory with the M (Zero memory indicator)n If you want to cancel the zero memory function, press the ZERO MEMORY button again.2. Find the zero position.n When you have finished playback, fast forward or rewind the tape.– The tape stops automatically when it reaches the zero position.n When you have finished recording, turn the power switch PLAYER and press the (REW) button.– The tape stops automatically when it reaches the zero position.3. The tape counter with the M (Zero memory indicator) disappears from the display andthe tape counter is changed to time code.Referencen In the following situations, the ZERO MEMORY mode may be canceled automatically– At the end of the section marked with the ZERO MEMORY function.– When the tape is ejected.– When you remove the battery pack or power supply.n The zero mem may not function correctly where there is a break between recordings on the tape.n The ZERO MEMORY will not operate in DV IN mode.SP STOPM 0:20:0033MINSP REWM 0:10:0043MINSP STOP0:10:00:0053MIN