Wireless network 93Connecting to a WLAN and configuring network settingsLearn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.Icon DescriptionAd hoc APSecured APWPS APSignal strengthPress [t] to open network setting options.• When you select a secured AP, a pop-up window appears. Enter the requiredpasswords to connect to the WLAN. For information about entering text, referto "Entering text". (p. 96)• When a login page appears, refer to "Using the login browser". (p. 94)• When you select an unsecured AP, the camera will connect to the WLAN.• If you select a WPS profile supported AP, select → WPS PIN connection,and then enter a PIN on the AP device. You can also connect to a WPS profilesupported AP by selecting → WPS button connection on the camera, andthen pushing the WPS button on the AP device.• If a pop-up message about data collection regulations appears, read andagree to it.Connecting to a WLAN1 Rotate the mode dial to .2 Select , , or .3 Follow the on-screen instructions until the Wi-Fi Setting screenappears.• The camera automatically searches for available AP devices.• In some modes, press [m], and then select Wi-Fi Setting.4 Select an AP.Wi-Fi SettingRefreshSamsung 1Samsung 2Samsung 3Samsung 4Back Manual• Select Refresh to refresh the list of connectable APs.• Select Add wireless network to add an AP manually. The AP name must bein English to add the AP manually.